Insure Your Furnace with an Extra Hot Surface Igniter

Silicon carbide igniters, commonly known as hot surface igniters, are an electrical component that is used in most new gas furnaces. Hot surface igniters are much like the filament of a light bulb, each time the furnace turns on, an electric charge is sent to the hot surface igniter reaching a searing temperature of roughly 2156OF-2426OF to ignite the gas burners of your furnace.

Life Expectancy of a Hot Surface Igniter

Under normal operating conditions, a hot surface igniter will last 3-5 years. During the heating season, the hot surface igniter can go through a tremendous amount of use. Furnaces cycle throughout a day to bring the home to the desired temperature set by your thermostat, hot surface igniters are energized through each furnace cycle. Most high efficient furnaces will cycle 3 times per hour whereas lower efficient furnaces can cycle as many as 6+ times per hour. In a year your hot surface igniter could be energized as over 20,000 times! Over time, through continued use, the filament of the hot surface igniter becomes brittle, and eventually breaks usually when you need it most.

Keep an Extra Hot Surface Igniter On Hand

Much better to have a hot surface igniter and not need one, than to need a hot surface igniter and not have one. There are numerous brands and models of furnaces, technology is changing every day. If you have an older furnace, it may take a while for a furnace contractor to locate a hot surface igniter specific to your furnace. Purchase an extra hot surface igniter for your specific brand and model of furnace to store at home it’s a great insurance policy for a time of need.

Maintain Your Furnace, Filter and Air Ducts

While there is a standard life expectancy of a hot surface igniter, routinely maintaining your furnace through an HVAC company, changing your furnace filters, and keeping your air ducts clean will extend the life of your hot surface igniter as well as other furnace components.

7 Steps to Solve Home Airflow Problems

cool air

We heat and cool our home to keep our family comfortable. With some homes, maintaining a consistent temperature within each room of the home can prove to be difficult. Some home airflow problems are easy to remedy, others require a more comprehensive approach. Solving home airflow problems can provide many benefits for indoor air quality, energy efficiency, and home comfort. Below are seven common problems and solutions to improving your home airflow.

Leaky Air Ducts

Repairing leaky air ducts is the single best thing a homeowner can do to solve airflow problems within a home.  When constructed, air ducts are sleeved and screwed into one another to deliver and draw air throughout the home.  In most ventilation systems, the joined sections are not air tight allowing for conditioned air to escape or be drawn from unintended areas.  Seal the joints of your air ducts with an approved mastic or sealant and you will realize a noticeable and immediate improvement to your homes airflow problems.

Distance from the Furnace and Air Conditioner

As the furnace or air conditioning system is in operation, it blows and draws air through a series of air ducts to condition each space of the home.  While there is a strong force of air pressure as the air is blown from the furnace or air conditioner, the strength of the airflow dissipates as it reaches the outer extremities of the ventilation system.  More often than not this airflow problem relates to poor design in the architecture of the home or poor installation practices of the HVAC system.  In some occasions, modifications can be made to the ventilation system to provide a greater volume of air with less restriction.  In most cases the most efficient and cost effective solution is to install zones within the ventilation system which are dampers that regulate air flow.

Lack of Return Air

Proper airflow within a home is always related to the circulation of air flow.  Your home relies on supply air vents which blow conditioned air into the home, and return air vents which draw the air back to the furnace or air conditioner.    A lack of return air vents decreases the circulation of airflow within a home, adding additional return vents in areas with limited airflow will improve a homes air circulation.

Dirty Fan Blower

Within the furnace or air conditioner cabinet there is a fan-blower which distributes the air. Overtime dust and debris builds on the fan blower blades reducing its ability to sheer and distribute the air.  By routinely cleaning the furnace on an annual basis you can improve your homes airflow.

Clogged Air Conditioner Coil

If you have air conditioning, located above your furnace cabinet  is an evaporative coil which is made up of tiny fins that absorb heat and cool the air. Overtime dust and debris builds up within the coil fins reducing the amount of airflow that the furnace can distribute. By routinely cleaning the evaporative coils on an annual basis you can improve your homes airflow.

Improperly Sized Heating and Cooling Equipment

Prior to installation, a HVAC load calculation is performed to determine the amount of heating and cooling BTU’s are required to effectively condition the temperature of the home.  If the HVAC system is under-sized or over-sized it will create home airflow problems.  An experienced HVAC technician can provide an HVAC load calculation to make sure that the HVAC is sized properly for the home.

Disconnected & Crushed Air Ducts

If there is no airflow or very limited airflow it may be related to a disconnected or crushed air duct.  Disconnected or crushed air ducts occur from faulty installation.  Remove the air vent register and inspect the ventilation line with a flashlight and mirror.  If the ventilation line is disconnected and is within an area that can be reached, refasten the ducting together with sheetmetal screws and seal the joint.  If the ducting is crushed, remove the crushed ducting piece and replace it.  There are occasions where the duct disconnection cannot be seen, in this scenario you will need the ventilation line to be scoped with a fiber-optic camera to determine the location of the disconnection and the best options to gain access for its repair.

Air Handler Insulation Repair

Most air handler units have fiberglass insulation installed on the interior surfaces to provide thermal insulation, absorb sound, and help to provide the quiet operation of the HVAC system.  As a whole, if properly maintained, air handler insulation has a long-term life expectancy.

In certain instances, the integrity of the fiberglass insulation will degrade and delaminate from the highly varied ranges of temperature, humidity and air turbulence. If the air handler insulation is left unrepaired, raw fiberglass fibers and insulation will enter the air handler components and airstream.

Each time a commercial HVAC system is maintained, the condition of the fiberglass insulation should be evaluated.  If the exposed fiberglass fibers are exposed to the airstream, it is best to remove and replace the air handler insulation, or resurface the damaged insulation with an approved HVAC encapsulate.

Encapsulants, Coatings, & Insulation Repair Products

When fiber glass insulation is initially installed, the exposed face of the fiberglass insulation has a primary seal that locks down the raw fiberglass fibers.  If the primary seal of the air handler unit insulation has begun to delaminate, the most cost effective repair is to encapsulate

Coatings and insulation repair products are designed to repair damaged or degraded HVAC surfaces.  Air handler Insulation repair coatings can range from coatings which lock down the fiberglass fibers to fiberglass coatings that have antimicrobial properties.

Surface treatments for air handler insulation repair must be labeled for the specific use in HVAC&R systems in or on any surfaces that are part of HVAC&R systems, and must be applied to a clean surface.

Air Handler Insulation Replacement

If the air handler insulation requires replacement, it is best to replace the fiberglass insulation with closed cell foam insulation.  Closed cell foam insulation offers many benefits over fiberglass insulation; its finish is smooth and more durable than fiberglass insulation, and resists dirt and moisture accumulation.

Hazards of Mold in Your Ductwork

Mold contamination within air duct systems can pose detrimental health effects to building occupants if left uncorrected.  If mold exists within your air ducts make a plan to investigate the source of the problem, isolate the problem area, and remove the contaminants.

Understanding Mold

Molds are part of the natural environment. Molds are fungi that can be found anywhere – inside or outside – throughout the year. About 1,000 species of mold can be found in the United States, with more than 100,000 known species worldwide.

When excessive moisture or water accumulates indoors, mold growth often will occur, particularly if the moisture problem remains uncorrected. While it is impossible to eliminate all molds and mold spores, controlling moisture can control indoor mold growth.  Molds are usually not a problem unless mold spores land on a damp spot and begin growing. They digest whatever they land on in order to survive. There are molds that grow on wood, paper, carpet, foods and insulation, while other molds feed on the everyday dust and dirt.

Since mold requires water to grow, it is important to investigate the source of the moisture to prevent mold growth.

Hazards of Mold in Your Ductwork

Ventilation systems are designed to distribute a recirculate air within a home.  If mold growth is within the ventilation system, or near an air intake, mold spores can be spread throughout a home.

“Toxic mold syndrome” remains controversial and unproven, but experts agree that it’s best to limit exposure to molds.  The most likely adverse reaction to mold is a respiratory allergic reaction in mold-sensitive people. These reactions are similar to other respiratory allergies, causing sneezing, watery eyes, nasal discharge and congestion.

Cleaning Air Ducts

Consider having the air ducts in your home cleaned if there visible mold growth inside hard surface (e.g., sheet metal) ducts or on other components of your heating and cooling system.

There are several important points to understand concerning mold detection in heating and cooling systems:

  • Many sections of your heating and cooling system may not be accessible for a visible inspection, so ask the service provider to show you any mold they say exists.
  • You should be aware that although a substance may look like mold, a positive determination of whether it is mold or not can be made only by an expert and may require laboratory analysis for final confirmation.
  • If you have insulated air ducts and the insulation gets wet or moldy it cannot be effectively cleaned and should be removed and replaced.
  • If the conditions causing the mold growth in the first place are not corrected, mold growth will recur.

Dangers of Air Duct Cleaning Chemicals

Air duct cleaning service providers may tell you that they need to apply a chemical biocide to the inside of your ducts to kill bacteria (germs), and fungi (mold) and prevent future biological growth.   Careful consideration should be taken before allowing the application of chemicals within your air ducts.  Due to the varying ranges of temperature, humidity and air turbulence there are very few chemicals that are approved for the use within ventilation systems.

Chemical Off Gassing

Organic chemicals are widely used as ingredients in cleaning and sanitizing products.  Volatile organic compounds (VOCs) are emitted as gases from certain solids or liquids.   Even a nearly odorless material can cause significant problems when re-circulated through air ducts in a closed environment.  VOCs include a variety of chemicals, some of which may have short- and long-term adverse health effects.

NADCA’s Position Regarding the Use of Antimicrobials

The National Air Duct Cleaners Association’s new position regarding the use of antimicrobial chemicals is as follows: “At this point in time, until EPA clarifies their position, NADCA does not recommend the use of any sanitizer or disinfectant products in air ducts.” This position was adopted to generate awareness among NADCA members of the potential legal liabilities they face by selling and applying antimicrobial chemicals. This is strictly a matter of managing legal risks. NADCA’s position deals specifically with sanitizers and disinfectants, not with any other product claims. Also, this position covers only air ducts, not HVAC components such as coils

No EPA Registered Products for Fiberglass Air Ducts

There are no products that are currently registered by EPA as biocides for use on fiberglass duct board or fiberglass lined ducts so it is important to determine if sections of your system contain these materials before permitting the application of any biocide.

If  You Choose to Use Chemicals in your Air Duct Cleaning Project

  • Review the product sheet showing usage and application of the product.
  • Review the Material Safety Data Sheet (MSDS) to understand if chemicals will cause any health or property concerns.
  • Review the Fact sheet on the product classification being applied.

If You Have a Problem Related to Chemicals Applied Within Your Air Ducts

  • Open doors and windows to ventilate the area with fresh air.
  • Operate the fan of the HVAC system
  • Exit the premises if negatively affected.
  • Contact and Industrial Hygienist to discuss the problem.  Be sure to have a copy of the MSDS.

How Humid Climates Affect Indoor Air Quality and Comfort

Regional climate plays a large role in Indoor Air Quality and comfort.  Regional climate characteristics are determined by geographic location and long term weather conditions.  Two of the most important factors that affect an areas climate are temperature and precipitation.

What makes Humid Climates Uncomfortable?

Humid climates have a high amount of water vapor in the air.  When it’s hot, high humidity makes people feel hotter because it reduces the ability to evaporate moisture from the skin.  In humid climates, becoming comfortable means going into a conditioned space.

Potential for Mold Growth

While mold spores are in every region and every climate, mold growth is highly dependent on the amount of humidity.  Mold growth typically occurs when an environment reaches a relative humidity of 60 percent or greater in a 72 hour span.  If mold is found within your home or workplace remediate the problem immediately, mold spores can be distributed throughout the home or building through the HVAC system impacting indoor air quality.

Air Conditioning in Humid Climates

Air conditioning coils serve a very important role in regulating temperature and humidity in humid climates.  As air passes through the evaporative coil of the air conditioner, heat and moisture are removed from the air.  To a degree, the lower the humidity level, the more comfortable you will feel at a given temperature.

Air Duct Cleaning and HVAC Maintenance

Overtime foreign debris is drawn into the evaporative coils and fan blower of the air conditioning system, gradually decreasing air flow and energy efficiency.  Maintaining HVAC system, will keep your cooling and heating components operation at peak energy efficiency, and prevent potential indoor air quality problems.  Yearly air conditioner inspections and routine air duct cleaning with assure maximum efficiency.

Energy Saving Tips for your Heating and Cooling System

We are all looking for ways to save money, one way to save money is to reduce energy consumption.  Did you know that in a typical home 45% of the energy cost go to Heating and cooling?  The US Department of energy estimates that 25 – 40% of the energy used for heating and cooling a typical home is wasted.

Whether your heating or cooling system uses natural gas, fuel oil or electricity it is a good idea to make it as efficient as possible.  Using less energy saves money and is better for the environment.

  • Install a programmable thermostat: these thermostats automatically turn down your system during periods when your typically away from home.
  • Change your air filter: Make sure to change your air filter regularly.  A clogged  filter will restrict air flow and cause your system to work harder and use more energy.  Most experts reccomend changing your air filter every two months.
  • Seal your air ducts: Sealing your ducts will also save you money in the long run.  You could be loosing nearly all your heating and cooling before it reaches your vents.
  • Clean your heating and cooling system: This is more than just duct cleaning, it involves cleaning all the components that the airstream touches in your heating and air conditioning system.  NADCA recommends cleaning the furnace, cooling coils, blower motor, and the ductwork.  Every part of the system is checked and cleaned, not just the ducts.

So how does cleaning your heating and cooling system save you money?

A dirty cooling coil reduces efficiency:  to cool your home air is blown across cold metal coils.  When the coils get clogged with dirt, airflow is restricted and air can no longer contact the metal.  This blocks airflow and limits the coils ability to properly cool the air.  Even in the winter months these dirty coils contine to reduce air flow through your furnace.  This means that the system losing efficiency all year long.

Duct Cleaning

Proper cleaning of an entire heating and cooling system takes technical skill and attention to detail, that is why it is important to rely on a company that is specifically trained and experienced in this type of cleaning.  NADCA members specialize in optimizing the efficiency and life of your system.

Remeber clean systems use less energy and clean systems last longer saving you money now and in the years to come.

Indoor Air Quality and Your Homes Heating and Cooling System

What Does the EPA say about Indoor Air Quality?

The US Environmental Protection Agency states that poor indoor air quality is one of the top five environmental threats to our country. So why does the EPA feel so strongly about indoor air in homes and workplaces? Well, according to the EPA, indoor air is on average a staggering three to five times more contaminated than outdoor air and in some instances as high as seventy times.

So why is indoor air so much worse in our home than outdoor air?

The answer is in modern day construction practices. Homes are being built more air tight in an effort to be more energy efficient and environmentally conscious. Older homes are being re-insulated and getting air tight window upgrades. The result is less drafty homes that no longer have natural ventilation to bring in fresh air.

Normal everyday living provides an ongoing source of airborne contaminants like dust, dander, chemicals and other allergens. These pollutants become trapped in your home due to this poor ventilation and then are re-circulated by your heating and cooling system.

So what does this mean for you?

The average American family now spends ninety percent of their time indoors. That means that the bulk of our days is spent breathing in these irritants and pollutants and the health effects are significant. Dust, pollen, household chemicals and smoke can create an unhealthy situation in your home for everyone, but especially for people with compromised respiratory systems such as children, the elderly, and people with asthma and allergy sufferers.

So what can you as a homeowner do to improve your air quality?

Today doctors agree that one of the healthiest things to do is to minimize your exposure to these indoor pollutants, allergens and irritants in your home. One of the most logical places to address indoor pollutants is in your heating and cooling system. Think of this system as the lungs of your home. It takes in air and breathes it out; it circulates all the air and everything in the air throughout your home. In fact, on average all the air in your home passes through your heating and cooling system five to seven times each day.

Begin by making sure that you regularly change furnace filter. While these filters do not eliminate airborne contaminants they can help reduce pollutants from entering your furnace and circulating through the house. Most experts recommend replacing your filter every two months.

Another important step to take to improve the quality of the air in your home, and one that many overlook is having your heating and cooling system thoroughly cleaned. As polluted air is re-circulated through your heating and cooling system dust, dirt, and contaminants are deposited throughout the system overtime. These subtle particles are then picked up by the airstream and are then pushed back out into the living areas of the house to be breathed in by family members. In a large number of homes the heating and cooling system has never been cleaned. Even in newer homes or homes undergoing renovation contaminants such as sawdust and drywall dust left over from construction process are deposited in your ducts.

So how clean is the heating and cooling system in your home? Here is a quick way to check. Remove a vent cover and use a mirror and flashlight to look inside. Or use a small digital camera to take a picture of the inside of your duct. If your ducts are dirty it is time to have your air ducts cleaned.

Choose a NADCA Certified Company

All NADCA members must meet a strict set of requirements:

  • Comply with NADCA’s International cleaning standards
  • Comply with NADCA’s code of ethics.
  • Comply with NADCA’s general liability insurance requirements
  • Maintain at least one certified Air System Cleaning Specialist (ASCS) on staff at all times

The Air Systems Cleaning Specialists Certification verifies that they have successfully completed rigorous testing on heating and cooling system components and cleaning techniques.

Giving your homes heating and cooling system a little attention will keep it and the air in your home cleaner and healthier for you and your family.

How Do Air Ducts Get Dirty

Compared to years ago when we heated our homes with wood or coal, a modern day heating system is a marvel of efficiency, reliability and convenience, but just like the old time systems these new systems get dirty and need to be cleaned and maintained.

How does an HVAC system Work?

Now you might be thinking “We keep a really clean home, shouldn’t out ducting heating and cooling system be clean to?”   To answer that question we have to start by looking at how you’re heating and cooling system works.  Think of your homes heating and cooling system as the lungs of your home.  The system pulls air from the rooms of your home through the return ductwork, and then the air passes through the filter before reaching the air handler or furnace where it is heated or cooled depending on the season.  Once the air is heated or cooled, it is blown through the supply ductwork and back into your home.  Some of the components of the furnace are used only during heating, others only during cooling, and others operate all the time.  Although the air is filtered, the fact is that filters cannot remove all the contaminants from the air, the system will get dirty through normal use.

HVAC components that get dirty:

  • Return air ducts
  • Filters
  • Blower
  • Heat Exchanger
  • Cooling coils
  • Supply ductwork

Where Does Dust Come From?

So where does dust come from?  Consider that up to forty pounds of dust is created each year from in the average six room home, this normal household dust is unavoidable as it is created by everyday living.  Every time we open the door, walk across carpeting, scratch out dry skin, or unroll paper towels we contribute to airborne dust.  Of course pets and dust emitting activities such as remodeling make the problem worse.  In fact, it’s not uncommon to find construction dust in a homes heating and cooling system years after the house was built.  On average, this contaminated air recirculates throughout your home five to seven times per day.  Why does it matter? This can develop into a serious problem.  The build up of these contaminants on components such as blowers and cooling coils can lead not only to unhealthy air for your family to breathe, but also to higher energy bills.  These contaminants can cause your system to work harder and run longer shortening the life of your equipment.  Perhaps most importantly the heating and air conditioning system needs to be cleaned to provide the thermal comfort you expect.

How Do You Inspect the Heating and Cooling System?

So how clean is the heating and cooling system in your home?  Here is a quick way to check.  Remove a vent cover and use a mirror and flashlight to look inside.  Or use a small digital camera to take a picture of the inside of your duct.  If your ducts are dirty it is time to have your air ducts cleaned.  Periodic air duct cleaning keeps your homes heating and cooling system clean and operating at peak efficiency.